The production process of small capacity of pharmaceutical glass bottles

The demand for medicinal glass bottles in the market continues to increase, so as a manufacturer, in the continuous introduction of high-tech production equipment as well as technology, at present in many areas are also used in the production of medical glass bottles with automated machines, the production of glass bottles with a small capacity, so the pipeline process of the initial mold and molding mold requirements are very strict, it needs to be a multi-feed drop, multi-unit in order to achieve the temperature required, which will be a very high number of requirements for the production of the number of.

At present, the domestic mostly for the following production process: hand-picked process, set up in the kiln side of the rod mouth, with the material stick into the hand-rotated rod head, wrapped around the glass liquid mass come out, against the handmade bottle making machine initial mold material mouth, and then hand scissors according to the size of the glass bottle shear glass material yuck, fall into the initial mold, and then blowing, the formation of the initial material yuck, and then hand-rotated to make the material yuck to maintain a balanced and uniform, into the molding die, is blowing, and then sent to the mold. Produce molded glass bottles, and then sent to the return kiln for secondary annealing. Our manufacturers in the production of medical glass bottles will also use a lot of smaller round kiln, we are placed in the surroundings of many unequal crucible pool, the middle is the combustion chamber, according to the requirements of the different colors of raw materials stirred into the crucible, after nearly twenty hours of combustion and melting, you can be from the crucibles, handmade materials for the production of the same operating steps and large-scale kiln set up next to the stick mouth, but this furnace can However, this kind of furnace can meet the requirements of different material color at the same time, but the disadvantage is that the material melting is poor, the production speed is slow, the output is low, the cost is high, and it is generally used for the shaped glass bottles with very small capacity and a small number of handicraft glass bottles.